Product Name: Odor-Free Environmentally Friendly Coating Film-Forming Aid
Manufacturer: Green Innovate Coatings
Product Use: Used in architectural, industrial, and specialty coatings for improved film-formation and durability
Contact Information: Main office, 567 Green Lane, Eco City, (555) 555-1234, info@greeninnovate.com
Emergency Telephone: (555) 555-6789 (24-hour hotline)
Hazard Classification: Not classified as hazardous under OSHA HazCom 2012
Signal Word: No signal word required
Hazard Statements: Product gives no toxic vapors, does not cause skin irritation during standard use, rarely produces eye discomfort in unventilated settings
Precautionary Statements: Avoid contact with eyes, wash hands after handling, use with adequate ventilation
Other Hazards: Large spills on floors may create slip hazards; film residue on skin may be difficult to wash off
Key Components: Water (60-80%), Plant-based Emulsifiers (5-10%), Polyvinyl Alcohol (5-8%), Glycerol (2-5%), Biodegradable Softening Agent (1-2%), Propylene Glycol (<1%)
Impurities/Stabilizers: Contains less than 0.2% performance stabilizers approved for food packaging
CAS Numbers: All primary ingredients sourced with recognized GRAS status; see ingredient documentation for reference
Inhalation: Move to fresh air; rarely produces irritation, but seek medical advice if symptoms persist
Skin Contact: Rinse skin thoroughly with soap and water; product leaves an invisible, residue-like layer if not washed
Eye Contact: Flush with water for several minutes, remove contact lenses, continue rinsing until discomfort ceases
Ingestion: Rinse mouth, drink water if conscious, seek medical attention if large volume ingested
Flammability: Water-based, does not ignite under normal use
Suitable Extinguishing Media: Water, foam, dry chemical, CO2
Specific Hazards: Heated above 200°C, product may produce mild smoke; non-explosive
Firefighter Protection: Standard protective gear, breathing apparatus for enclosed spaces with heavy smoke
Personal Precautions: Slip-resistant footwear, gloves if skin sensitivity is known
Environmental Precautions: Prevent discharge into open waterways; product breaks down but excess can stress local bio-systems
Clean-Up Method: Absorb with inert material, wipe or mop residue, rinse area with water, dispose of waste following local regulations
Handling: Use in well-ventilated spaces, avoid prolonged inhalation in misted areas, ensure containers are closed after each use
Storage: Store at 5°C – 35°C, away from sunlight and strong oxidizers, keep containers upright to avoid leakage, stack below shoulder height for ease of access
Incompatibilities: Do not mix directly with concentrated acids or alkalis, product loses effectiveness when exposed to high salt concentrations for long periods
Engineering Controls: Local exhaust only in continuous spray operations; workplace hand washing stations recommended
Personal Protection: Standard gloves for sensitive skin users, splash goggles for bulk transfers, no respirator needed under normal conditions
Exposure Limits: No OSHA, ACGIH, or NIOSH limits established for listed ingredients; monitor workplace air if atomizing large volumes
Hygiene Measures: Wash after handling, clean clothing before reuse, do not eat or drink in work area
Appearance: Milky white liquid
Odor: Practically odorless; faint plant-like undertones
pH: 6.5 – 8.5
Boiling Point: > 100°C
Freezing Point: Around 0°C
Flash Point: Not applicable (non-flammable)
Density: 1.01 – 1.05 g/cm3
Solubility: Fully dispersible in water
Viscosity: 60-150 mPa·s
Partition Coefficient: Not expected to bioaccumulate; product distributes in water
Chemical Stability: Stable under standard conditions, does not degrade at normal room temperature, maintains form within pH 5-9
Hazardous Reactions: No hazardous polymerization, no exothermic reaction with common construction chemicals
Incompatible Materials: Strong acids, bases, concentrated salts, strong oxidizers
Decomposition Products: CO2, water vapor, trace organics above 200°C
Acute Toxicity: Ingredients rated as practically non-toxic based on laboratory data; ingestion of large quantities may produce digestive upset
Skin Corrosion/Irritation: No observable irritation with standard use, but those with known chemical sensitivities should test before handling large volumes
Eye Damage/Irritation: Temporary mild irritation possible if splashed in eyes, clears after washing
Chronic Effects: No known organ toxicity, carcinogenicity, teratogenicity, or reproductive hazards
Routes of Exposure: Skin contact, eye contact, accidental ingestion, inhalation of atomized mist
Ecotoxicity: Readily biodegradable by OECD 301F tests, not toxic to fish or algae at expected environmental levels
Persistence/Degradability: Breaks down in soil and water within 28 days
Bioaccumulation: Not expected to accumulate in aquatic or terrestrial organisms
Mobility: Moves easily through soil with water, unlikely to bind to sediments
Other Effects: Excess discharge into sensitive water bodies can spur microbial activity, increase oxygen demand temporarily
Waste Disposal: Rinse containers before recycling, collect liquid residues for licensed waste processing, can be landfilled as non-hazardous solid waste once fully dried
Sewage Disposal: Small dilutions can enter municipal wastewater with high dilution; avoid direct discharge of large concentrations
Packaging Disposal: Recycle plastic or metal drums, returnable packaging preferable for bulk customers
Road/Rail/Sea Shipment: Not regulated by DOT, IMDG, or IATA
UN Number: None assigned
Packing Group: None required, ship in tightly sealed containers during freezing temperatures to prevent rupture
Special Precautions: Keep upright, avoid tipping, secondary containment for bulk shipment in tankers
Labeling Requirements: No GHS pictogram required under OSHA or EU REACH
Chemical Inventory: All ingredients listed on TSCA, REACH, and Canadian DSL
SARA Title III: Product does not contain ingredients subject to SARA reporting
CAL PROP 65: Contains no substances known to the State of California to cause cancer, birth defects, or other reproductive harm
RoHS/WEEE: Compliant for use in electronics applications
Additional Compliance: Suitable for use in food-contact applications as per FDA clearance for polymeric coatings, always verify with current federal and local regulations
