Product Name: Acrylic-based Film-Forming Aid for Waterborne Coatings
Chemical Family: Glycol ethers and esters blend
Product Use: Promotes coalescence in paint and coating applications, commonly used across both commercial and household products, helps with surface film formation.
Supplier: Local chemical distributor contact number available on label
Emergency Phone: 24-hour technical and medical emergency support provided
Synonyms: Noted as Film Aid Blend Model 800 or similar by different suppliers
CAS Numbers: Mixture features elements like CAS 25265-77-4 (2,2,4-Trimethyl-1,3-pentanediol monoisobutyrate), CAS 112-34-5 (Diethylene glycol monobutyl ether), CAS 111-76-2 (Ethylene glycol monobutyl ether)
Physical State: Clear or slightly cloudy liquid, faint solvent scent
Signal Word: Warning–some skin and eye irritation possible; vapors cause drowsiness or headache if concentrated
Hazard Statements: Causes mild skin irritation, serious eye irritation, may impact central nervous system, possible harmful effects from breathing or prolonged skin contact, not listed as carcinogenic but chronic exposure raises workplace health concerns
Precautionary Statements: Wear gloves, eye protection, avoid breathing mists or vapors, keep away from open flames and hot surfaces, open windows or use ventilation to lower vapor concentration during use
Component 1: 2,2,4-Trimethyl-1,3-pentanediol monoisobutyrate — 40–60%
Component 2: Diethylene glycol monobutyl ether — 20–40%
Component 3: Ethylene glycol monobutyl ether — 10–20%
Impurities/Stabilizers: Water (<2%), trace additives for shelf-life
Specific Chemical Boundaries: No ingredient above 1% is classified as carcinogenic, hazardous impurities minimized per manufacturing controls
Inhalation: Move to open air, loosen tight clothing, support breathing and monitor for continued symptoms like dizziness or headache, medical attention for persisting effects
Eye Contact: Flush using clean water for at least 15 minutes, hold eyelids open, remove contact lenses after initial rinse
Skin Contact: Wash using soap and water, remove contaminated clothing, avoid scrubbing raw areas, medical support for any blisters or ongoing discomfort
Ingestion: Rinse mouth, drink small amounts of water, do not try to induce vomiting, head to hospital for large amounts swallowed
Suitable Extinguishing Media: Foam, dry chemical, carbon dioxide, water mist for larger fires
Unsuitable Media: Direct water stream spreads solvent
Fire Hazards: Vapors can travel along surfaces to ignition sources; can form toxic fumes (carbon monoxide, carbon dioxide) when burning
Protective Equipment: Self-contained breathing apparatus, full gear recommended for responders
Special Actions: Cool nearby tanks or drums with water spray, avoid run-off collection in sewers
Personal Precautions: Wear chemical-resistant gloves, goggles; avoid breathing vapor
Spill Containment: Ventilate area, remove all ignition sources, dike or absorb spill with sand or inert material
Cleanup Methods: Scoop up with non-sparking tools, use approved absorbent, dispose in sealed drums
Environmental Concerns: Prevent entry into drains, surface or groundwater; notify environmental authorities about significant spills
Handling: Keep container sealed when not in use, use in ventilated zones only, avoid splashing or contact with unprotected skin
Storage: Store in cool, dry, shaded warehouses, keep away from strong oxidizers and acids, avoid temperatures above 35°C
Incompatibilities: Avoid acid and alkali contact; do not mix with nitrites or peroxides; store separate from food and animal feed
Container Materials: Steel or HDPE drums recommended, do not reuse after emptying unless professionally cleaned
Occupational Limits: Ethylene glycol monobutyl ether ACGIH TLV: 20 ppm (TWA); others – consult latest national exposure standards
Engineering Controls: Local exhaust ventilation preferred; general ventilation keeps vapors under control
Personal Protection: Safety glasses or face shield, chemical-resistant gloves (nitrile or butyl); lab coat or apron for regular handling
Respiratory Protection: Use organic vapor cartridge mask if concentration reaches above occupational limits
Other Precautions: Remove contaminated clothing promptly, wash hands before breaks, avoid eating or drinking in work zones
Appearance: Transparent to slightly hazy, colorless or light amber liquid
Odor: Mild, sweet or ether-like
Boiling Point: Range from 170°C to 230°C (depending on blend)
Melting Point: Below -20°C
Vapor Pressure: Low at room temperature (less than 1 mmHg at 20°C)
Specific Gravity: 0.95–0.99 (water = 1)
Solubility: Miscible with water, organic solvents
Viscosity: Thinner than honey, similar to motor oil
Evaporation Rate: Slower than water
Flash Point: Minimum 90°C (closed cup)
Chemical Stability: Stable under normal use and storage conditions
Reactivity: Does not react with most building materials; may react with very strong oxidizers
Conditions to Avoid: Heat, open flames, long storage above recommended temperatures
Incompatible Materials: Strong acids, bases, oxidizers, nitrites, aluminum under some conditions
Decomposition Products: Carbon monoxide, carbon dioxide, organic irritants if burned or overheated
Routes of Exposure: Inhalation, skin and eye contact, accidental swallowing
Short-term Effects: May cause mild skin, eye, and upper respiratory irritation, dizziness or nausea if inhaled in poorly ventilated spaces
Long-term Effects: Prolonged or repeated exposure leads to skin dryness or cracking, possibly affects liver or kidney function in rare, high-dose cases
Carcinogenicity: Not listed as a carcinogen by IARC, NTP, or OSHA
Sensitization: No clear evidence for allergic reactions; some people with sensitive skin may have contact dermatitis
Mobility: Moves through soil slowly, soluble in water so can leak into groundwater if large spills occur
Aquatic Toxicity: Moderately toxic to freshwater organisms, higher doses can cause stress to fish or aquatic plants; expected to biodegrade in weeks to months
Persistence: Does not build up in soil or water under normal conditions
Bioaccumulation: Not likely to build up in aquatic life
Additional Impacts: Large leaks overwhelm wastewater plants, so spills near waterways need quick response to limit harm
Waste Disposal Methods: Collect leftovers and contaminated absorbents in approved waste drums; follow local hazardous waste rules
Product Disposal: Incineration recommended at licensed sites; landfill only under authority approval
Container Disposal: Rinse drums, puncture or crush before landfilling or recycling at designated locations
Environmental Precautions: Avoid release to soil, drains, surface or ground water, and never dump untreated leftovers down regular sewers
UN Number: 3082
DOT Shipping Name: Environmentally hazardous substance, liquid, n.o.s. (contains glycol ether blend)
Transport Hazard Class: Class 9
Packing Group: III (minor hazard)
Label Requirements: Standard Class 9 label, plus marine pollutant mark if shipped by sea
Special Handling for Shipment: Ship upright, avoid stacking, keep docs accessible during transport
Transport by Air/Rail/Sea: Acceptable under IATA, IMDG, ADR with correct packaging and documentation
Occupational Safety: Listed in workplace safety rules in US (OSHA), Europe (REACH, CLP); subject to storage, labeling, and reporting requirements
Environmental Laws: Covered by US EPA, Canadian Environmental Protection Act, EU REACH; glycol ethers face restricted use in some regions
Consumer Product Laws: Must meet VOC limits for paints and coatings in North America, Europe
Right-to-Know Regulations: Components named on US SARA Title III, Canadian DSL/NDSL, EU EINECS/ELINCS lists
Hazard Communications: Suppliers responsible for clear labeling, workplace training, updated safety data sheet provision, and periodic regulatory review
